-
```
What steps will reproduce the problem?
1. use the right motor test slider
What is the expected output? What do you see instead?
for the left slider to rumble the big motor and the right slider to…
-
The galil IOC sets the motorStatusPowerOn_ asyn parameters, but there is no DB record looking at "MOTOR_STATUS_POWERED". This is a parameter inherited from the model 3 motor driver and not inherant to…
-
Is there a list of supported motor shields that can be used with this? For instance:
1. 2A MOTOR SHIELD FOR ARDUINO from DFRobot
2. L298 Dual Bridge DC Motor Driver Shield 2A
3. Arduino Motor Shiel…
-
A sudden quick print head move (X and Y motors) blew up the U2 (SGM6130) power chip leaving the board not operational...
Is there proper protection from such voltage coming from the motors?
Driver…
-
In /etc/init.d/rcS there is a line:
```
Calibrate the motors for newer models without endstops:
motor calibrate
```
This goes into the /usr/scripts/common_functions.sh:
`/usr/bin/motor -d f …
-
## Current Behaviour
Load a sketch with an obsoleted part (Dual_VNH2SP30_Motor_Driver in this case)
![capture](https://user-images.githubusercontent.com/16514277/221991414-cc683d8d-b366-4528-bd3…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Using TMC2209 drivers on an Octopus motherboard with a full graphics smart controller. …
-
I have a camera board with yt8512C ethernet chip, i've been able to run thingino firmware on this board but only with stock u-boot so the ethernet can still work, is there anyway to add support to thi…
-
I am thinking of also controlling the stepper motor to control the Z stage of the printer but I don't think I can just connect the pins to the custom pcb and modify the python script to run it. Would …
-
Update motor control driver for synchronous motor