-
A number of variables generated by the ww3_ounf netCDF processor do not have names documented in the CF conventions [standard_names table](https://cfconventions.org/standard-names.html)
This is th…
-
Recently, we began using some of your classes in Apollo-SV, which focuses on epidemic modeling and computational epidemiology, because some modelers incorporate climate data into their models. As such…
-
Stella Dei currently has many mechanics, none of which use any real physics unit, thus those should be converted:
- [x] Planet radius (preferably express it in km, currently most values are expressed…
-
- Capture the temperature using DHT22.
- Capture the humidity using DHT22.
- Water temperature sensor (DS18B20).
- PH sensor (Pro SKU SEN0169).
- 2 Fans.
- Verin.
- Relay a 4.
-
Hey 👋
I am probably doing something horribly wrong but it seems that I cannot set the hotwater temperature via Homeassistant. The Error log I get is attached. It seems that the component is calling …
-
Issue overview
--------------
The screenshot below shows the inlet and outlet flow rates and temperatures of the air and water across a chilled water cooling coil. From 24:00 to 5:00, there is no a…
-
Coffee section:
- Coffee
- Origin
- Roast level
- Region
- Variety
- Process
- Flavor profile
- Coffee recipes
- Time
- Weight
- Coffee
- Temper…
-
The water that gets put in has no temperature, and if I gm-editor its temperature up, the engine still doesn't move. Well, unless max temp was too much...?
-
### What version of Spook are you using?
3.1.0
### What version of Home Assistant are you using?
2024.11.1 (it was also present in 2024.10.x)
### The problem
I get this error:
> The automation…
-
Thxz for the fix it solve the "boiler" not showing up I had yesterday... :)
I now have a different issues I hope you can fix...
My system.
1 Boiler EHST30D-YM9ED
3 AC SLZ-M25FA
1 PAC-TZ02-E…