-
Hello,
Using the [7.5inch E-Ink display HAT for Raspberry Pi, red / black / white three-color](https://www.waveshare.com/product/7.5inch-hd-e-paper-hat-b.htm) crashes and reboots the [Raspberry Pi …
ghost updated
2 years ago
-
Hi; I have downloaded paperpi on a raspberry pi 3 using the current outlook rendition. I am operating a waveshare 4.2 screen. Download was fine and set up on Damon. I am running the word clock and pha…
-
From going over the design a couple times now and having been mostly not involved in the initial ~5 revisions, there does seem to be a lot of costly (design, parts, and firmware) legacy and there are …
-
I have this round 1.2" inch oled EA W128128-XRLW; [https://www.mouser.fi/ProductDetail/ELECTRONIC-ASSEMBLY/EA-W128128-XRLW?qs=sGAEpiMZZMshRHSPqbouvJWDKQb1KqZ10IgVqkv8Swn4rpO3VjZ11w%3d%3d](url)
I wi…
-
On Hellen 128 Pin Mercedes Pin KF21 is associated to ignition, but on the stock ECU that pin is for engaging the supercharger clutch (pin pulls low to trigger relay that feeds clutch 12V)
We need a…
-
[klippy.log](https://github.com/KevinOConnor/klipper/files/3537562/klippy.log)
This is a weird one. Given the _same physical machine_, and a 320 ohm resistor in place of the extruder thermistor:…
-
Hello!
I really like the simplicity of JTAGscan over JTAGenum. Thanks for writing it.
I'm using it on [Xiaomao](https://github.com/tigard-tools/xiaomao) as a simplified light-duty alternative to t…
-
https://jzxproject.com/bbs/index.php?/topic/10809-toyota-x-chassis-workshop-manual-and-wiring-guide-motherload/
ПЕРЕВОД
У них есть тонны хороших вещей здесь: http://www.ciscokids.com.au/technical/…
-
The compressor contactor (a) sometimes engages itself without input during bumpy travel and (b) typically sticks in the 'on' position and will not disengage. Tapping on the side of the contactor assem…
-
High, all.
I am VERY new to this, so my appologies if this is being posted in the wrong place. I am trying to add a BLTouch Smart to my Anycubic Kossal but having problems.
When I turn on the…