-
I'm using an M2 MacBook Air and Aldente Pro version 1.18.
However, while the aldente is in calibration mode, turning off the external monitor does not work.
When charging and discharging in cali…
-
Hi,
thanks for the great project, works great on two smart solar chargers. I have added a third solar charger (100/20 @ 48V) and want use not required power before fed into the grid for an external 6…
-
Hi @syssi,
Not sure if it was already implemented but seems there is a new variant of the protocol :
[Axpert_KSMKSV_RS232_Protocol-C20170821.pdf](https://github.com/user-attachments/files/1552113…
-
### The problem
Also, `Sleep Mode (new)` does not seem to do anything.
Please check my recording:
https://www.dropbox.com/scl/fi/xunx6tg5in8262rp7n64d/OpenEVSE-sleep-override-isssue-240515.mov?rlke…
-
## Bug Report
#### Current Behavior
The memory `$ram_pct` and battery `$percentage` variables have a single-space padding when they read double-digits.
#### Expected Behavior
Percentages d…
-
Hi,
There is no charging status in the list of sensors for the EV9 in the EU region.
Please can this be added.
Thanks
-
Hey,
Thanks for the project.
I have one unit, and testing it now.
Where did you get the CAN bus documentation?
-
It turned out that after I connect my Sony A6000/A7II to the USB port (raspberry pi 3), the battery saving function will not work and the camera will be on forever until the battery gets drained. I am…
-
https://community.frame.work/t/turn-off-power-led/11967/3
Related to [Benjamin-Loison/cinnamon/issues/67#issuecomment-2146256288](https://github.com/Benjamin-Loison/cinnamon/issues/67#issuecomment-…
-
Hi guys.
Is this project still alive?
I was planing to buy one of this boards (simple evse wallbox) to build my own charger.
There are any new developments? any support?
I don't see anithing relat…