-
I was using the `--hist` feature, and came across 2 questions. The first is that the adjusted QV looks very low, but may be reasonably as the calculation just involves adding the overcopy kmers to the…
-
Running on a RPi 3 A, with ASI120MM.
Going into evening, sometimes the exposure does not adjust and stays at daytime rates of around 0.05s, resulting in an night full of very dark Images. I have tri…
-
**Bug Description:**
After setting a filter keytracking to 100% I'd expect eh filter to play in unison with the oscillators.
Even after manually tunining the base filter frequency to match the oscia…
-
**Describe the bug**
I have created a tab delimited interlinear corpus but when I try to load it PCT shows an error.
**Sample corpus file**
[Sample corpus fort Github.txt](https://github.com/Pho…
-
I have built SDL2 from git (latest version) but it fails to load sdl2 with X11 Desktop, while it works with CLI (GBM).
For some reason, running with X11, it tries to load the libudev symbols **before…
-
[2022-05-31 02:44:25] [316241c6] [30] urllib3.connectionpool: http://192.168.2.109:8080 "GET /api/v1/allocations/7.ee72787d-c20e-4824-b0da-ef3e3287e708.1/signals/preemption?timeout_seconds=60 HTTP/1…
-
## Environment
- Development Kit: ESP32-Wrover-Kit
- Kit version (for WroverKit/PicoKit/DevKitC): v4.1
- Module or chip used: ESP32-D0WD
- IDF version: v4.1-dev-2222-g7647b5c66
- Build System: C…
-
I'm opening this issue to document my experiments with Luna (https://github.com/greatscottgadgets/luna) on glasgow.
Unsurprisingly Luna works fine using the lvds connector. Here is the platform de…
-
_From @Roxy-3DPrintBoard on March 30, 2016 19:59_
The Atmel ATSAM3x8e on the Due board is definitely viable. It has the benefit it can plug into the RAMPS or RADDS base board and at that point it i…
-
I'm trying to add a USB host to my board using a @Dolu1990 pmod (https://github.com/Dolu1990/pmod_usb_host_x4 , thanks :-) ).
Using a 48 MHz input clock, the design did not pass timing (~2.5 ns NS …