-
地點在臺灣大學（校總區）的樂學館二樓，
錄音機：Korg MR-1000 / 1bit-5.8MHz DSD portable recorder
Mai-khu: The Shure SM10A Headworn Vocal Microphones
The Shure SM10A is a low-impedance, unidirectional dynamic microph…
-
Hi Aaron,
I hope this message finds you well. I have a couple of technical questions regarding electrical impedance tomography (EIT) that I hope you can help with.
First, after the boundary volt…
-
Hello 👋 I bought my sensor watch some time ago and i broke it 😬 I broke it during soldering the buzzer connector. probably temperature was too high. the sensor watch works correctly, but it drains bat…
-
ostree has two major parts:
- OstreeRepo (object store, commits)
- OstreeSysroot (has-a OstreeRepo, extends with bootloader support, deployments, etc.)
As part of https://github.com/containers/…
-
How to define macros for excitation voltage output. I am using AD5933 for impedance measurement .But i did not known how to set the excitation voltage value .
[arduino-ad5933-master.zip](https://gith…
-
Hi and many thanks for the great component!
As soon as v4 was released, I migrated my configuration to it. Back then I noticed that no readings from sensors were ever received.
I rolled back to …
-
## *Lab/Experiment(s) Hosting Request*
1. **Hosting Unit**:
1 | Modes of Vibrations of Vibration of Simply Supported Beam | https://github.com/virtual-labs/exp-simply-supported-beam-iitd | Mas…
-
## It would be nice if there was a way of getting the maximum available power for every load, along with efficiency of every load for a given network
Jacobi's law, also known as [the maximum power …
-
Despite correcting for better impedance value (15000 ohms) for 3NS01, there seems to still be a problem in bruxism processing for 3NS01_cohort2.edf. It needs to be addressed as the data on the recordi…
-
Capytaine and Nemoh use the following convention for time-frequency domain:
$x(t) = R(Xe^{-i\omega t})$
This is different from what is done in most codes and textbooks (positive, rather than neg…