-
### Describe the problem
As described in the [FAQ](https://github.com/arduino/library-registry/blob/main/FAQ.md#can-i-check-on-library-releases-being-added-to-library-manager):
>For example, the S…
-
I'm trying to get this tracker software to work with a 360 degrees servo, no luck so far.
the servo only spins faster and faster.
can 360 servo support please be added if possible ?
-
Nice addition to Espurna is mechanical servo (pwm step motors) support...
I've implemented Servo support (as a 3'rd party plugin to begin with),
1. Using Relay switches to set predefined positions…
-
either running average or do interpolation/fade between present pos and target
-
When running ex2_full_sweep_with_180_deg_servo.py with debug enabled:
`test = pi_servo_hat.PiServoHat(None, 1)`
I get this output:
```
PWM Frequency: 50
Bit number is outside the bounds of …
-
I wondered if you could add a function like this to the servo control code. It is to detach the servos and thus make them loose power. This is handy for shutting the robot down in an emergency for exa…
-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
```
The following features still need to be implemented:
1. ls baud - list, with baud rate change
2. set param index value - set a parameter (position, speed, tuning)
3. get param index - get a param…
-
Currently the maze is running three microcontrollers and a region of interest detection with a closed loop camera system. This is certainly an overkill for the tasks we are running, and complicated as…