-
### Summary
When running an ECS task using an EC2 Windows cluster, the task starts and runs perfectly for about an hour or so. Shortly after that it's IP gets reset to a link address IP (169) and I'm…
-
Hi,
I'm running 6.2 kernel so I can use VLAN on the eth1 Fiber SFP and I'm observing a lot of packets getting dropped. Only the received ones. The SFP and Fiber were moved from another router that…
-
I converted the VMware disk images to VHDX and set up a test lab in Hyper-V. The images boot and work to some extent, but not completely. In essence, the engine can receive incoming packets from the v…
-
**Describe the bug**
When you assign a tagged VLAN that isn't 1 to the `mgmt` cluster network DHCP fails.
**To Reproduce**
Steps to reproduce the behavior:
1. Provision a Harvester cluster
2. C…
-
### Before creating an issue, make sure you've checked the following:
- [X] You are running the latest released version of k0s
- [X] Make sure you've searched for existing issues, both open and cl…
-
`cmake -DBUILD_SHARED_LIBS=ON` fails but building static works. I'm not an expert, but I'm guessing something gets stripped out of libgit.so which isn't stripped out when it's libgit.a
```
[2/8] …
-
### Community Note
* Please vote on this issue by adding a 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to the original issue to help the com…
cutik updated
2 years ago
-
Question related to
Sunsynk / mbusd Home Assistant Add-On
Describe the issue
Hi KellerZA
I'm thinking of trying to replace my PI with an ESP device - It would be great and have loads of benefi…
-
As we all know AWS-VPC-CNI waste a lot of ip addresses during allocation and deallocation of pods and that is why our Production cluster is full of ip limit exhaustion alerts . Now as of now we can no…
msa21 updated
2 years ago
-
Hi,
I'd like to tap into the braintrust here for some suggestions on how I should/could configure for my environment. I have scanned through the posts here and can't seem to find a similar configur…