-
Your firmware version: 2.11.26
Your bootloader version: ALL
### Hardware
* UI Board: ALL
* RF Board: ALL
### Describe the issue:
Pressing Tune crashes the TRX, need to remove power.
…
-
... in order to allow choosing modulation modes BPSK, O-QPSK, and sub-modes (speed), without recompiling.
See: RF212B data sheet p. 117
-
In CW mode (mcHF 512kB), the TCVR does not transition into the receive mode (RX) when paddleing. It still remains in mode TX. The last OK firmware was D2.11.17.
Milan
OK1IF
ok1if updated
5 years ago
-
The following files should be deprecated and removed on next
* gr-digital/python/digital/bpsk.py
* gr-digital/python/digital/qpsk.py
* gr-digital/python/digital/qam.py
## Rationale
These ar…
-
Help, tip gevraagd!!!
Wat hebben we al geprobeerd:
1. 42 geprobeerd (duh!)
2. Datasheet van die kluis opgezocht, moet tussen 3 en 8 cijfers zijn, dus 42 kon toch niet.
3. Geluidsfragment geana…
-
For now support for three specific node types would be nice:
- Some node to do 0 and 1 generation, u8 output
- Uniform random variable node, should support start and stop range parameters for node i…
-
Hi,
any chance to support the 868MHz/915MHz bands? In contrast to 2.4GHz the standard uses BPSK instead of QPSK. Also the bitrate is different (20/40 kb/s).
-
I have started the work on implementing PSK mode. The objective is to be able to fully communicate in PSK without using a computer. There is a multitude of design issues.
1. Selecting the PSK mode
S…
-
The object attributes which are currently defined are those attributes which were part of the CFP MSA MIS 2.2. Attributes not in the MSA were deemed vendor-extensions and not included in the TAI. But …
-
Cross compiled (and statically linked) with
```
cmake .. -G"Unix Makefiles" -DCMAKE_CXX_COMPILER=arm-linux-gnueabi-g++ -DCMAKE_BUILD_TYPE=Release -DCMAKE_CXX_FLAGS=" -Wall -funroll-loops -march=armv…
Nixes updated
6 years ago