-
It would be nice if the digicam feature with engine cut was easier to setup. When planning a mission lots of the settings have to be manually changed and this sticks when dealing with lots of waypoint…
-
```
What steps will reproduce the problem?
Take a picture using a Samsung Galaxy Note 8 or 10.1 in bright sunlight.
Upload to a web server and analyze with fxif.
What is the expected output? What…
-
after pressing "snap" several times there is a green line added between 1hz and 10 hz digit (across these 2 numbers and half way down into the spectrum)
that is new fault
-
We need to split these into user and advanced.
To me these are user:
- MAV_CMD_NAV_WAYPOINT
- MAV_CMD_NAV_LOITER_TIME
- MAV_CMD_NAV_RETURN_TO_LAUNCH
- MAV_CMD_NAV_LAND
- MAV_CMD_NAV_TAKEOFF
- MAV_CMD…
-
Hello
we photograph many acres per day (1000+) attempting to create a clean layout for large fields is a nightmare from a camera trigger perspective.
for smaller fields I use digicam control but I c…
-
```
I understood the concept, got the .pde sources and the "processing"-application
but there seems to be no readme.txt or anything telling
me what do do next.
In guess I have to run ThreePhaseScan_2…
-
```
I understood the concept, got the .pde sources and the "processing"-application
but there seems to be no readme.txt or anything telling
me what do do next.
In guess I have to run ThreePhaseScan_2…
-
```
APM2, ACM, MP 1.2.1
What steps will reproduce the problem?
1. Follow steps in wiki to setup camera triggering function
(http://code.google.com/p/ardupilot-mega/wiki/Tracking) - Set RC8_FUNCTION >…
-
A new parameter called CAM_TRIGG_MAX that defines the maximum firing rate of the camera. While firing using CAM_TRIGG_DIST, the ground speed will not cause this rate to be exceeded. In this case the o…
-
@dogmaphobic It would be great if you could lend a hand in adding a camera trigger UI. I will post the parameters here. What is needed is a visual indication what the trigger pins are (AUX 1-6 on Pixh…