-
*初期状態の確認などが問題文下部にあるので確認をお願いします。
トポロジ&IPアドレス表
https://drive.google.com/open?id=1gZUAuUO3VP0Nn4TrLIHpiM4gkaOsp3j4
あなたは友人とともに自宅のネットワーク環境を整えています(図参照)。友人はCSR2,CSR3を設定しました。
あなたはCSR1を操作しネットワークを完成させなけ…
Noiri updated
5 years ago
-
I want to propose a pull request that does the following:
in order to get consistent configuration to the config, default vrf is mapped into an other vrf named vrf0 ( created upon configuration).
Li…
-
On OpenWRT, when I run any of FRR's daemons, I receive log output like following, although I do not have selected the NS backend:
```
2018/08/25 14:39:47 errors: ZEBRA: NS initialization failure 2(N…
-
This config:
```
!
frr version 6.0-ne-vlezay80
frr defaults traditional
hostname router
!
ipv6 route 2a01:d0:c353:183::/64 Null0
!
vrf ext
netns /run/netns/ext
exit-vrf
!
vrf servers
…
-
This is found on FreeBSD 12.0 with latest master.
Whenever I try to establish OSPF neighbors after a reboot of the FRR node, the neighbors can't be established.
It seems to be fixed if Interfaces …
-
Hi,
I've notice the same behavior on 2 routers. I don't know which is the reason, but PIMD is starting to use high CPU:
R5:
```top - 13:11:54 up 12 days, 23:32, 2 users, load average: 1.31, 1…
-
### Things you may try first
* [x] Did you check if this is a duplicate issue?
* [x] Did you test it on the latest FRRouting/frr master branch?
**Related Issue:**
#2671 #2750 ~~#879~~ ~~#421~~
…
-
Right now the redistribute options available for each daemon is a bit mixed: each one has different options available, but none of them support everything that FRR is capable of. I was actually going …
-
Hello.
I have some configurtion on RS 1:
```
!
ip route 0.0.0.0/0 192.168.1.1
!
interface vlan780
ip address 192.168.1.8/27
!
interface vlan781
ip address 10.10.10.33/27
!
router ospf
…
-
I'm using frr for BGP in DN42 (wich use private ip subnets)
For whatever reason, if I apply any filter on a bgp peer, I won't install any routes.
If I do a ``show bgp ipv4 unicast sum`` ,I can see…