-
It would be nice if I could upload a firmware to the arduino 3d printer controller straight from the raspberry pi. I have downloaded "ino" but doesn't seem to work out of the box. Maybe someone coul…
-
pity, have it as in the picture connected. but as soon as I hold the joystick with my hand and the sensor is activated, the yaw and the thrust axis tremble.
![grafik](https://user-images.githubuser…
-
I have the original vexta stepper 5 phase 0.72degrees with the stepper driver http://www.orientalmotor.com/products/pdfs/opmanuals/HM-60042E.pdf It is the driver without the directional switch pins. I…
-
the error is
"Msg: timeout occured while reading from the device.
Cause: check that link cable is plugged and/or the calculator is ready."
I can't seem to fix it
I have the port right, the cable …
-
Hi. I recently bought this camera https://www.avidsen.com/?view=product&lang=en_US&product_id=630. Which is basically a smartlife(tuya) camera running firmware 2.9.1 Port 80 is open but when i try to …
-
Chocolate factory is in trouble. One of the twelve chocolates is either lighter or hea…
-
# Why and What
https://github.com/1404Damel/MITocw made a github for this
I mainly did this to supplement my knowledge because my university is not that good (they don't even give programming assig…
-
The documentation of GHDL contains a brief [Quick Start Guide](https://ghdl.github.io/ghdl/quick_start/index.html) to introduce GHDL's CLI interface to users, but it does not contain an introduction t…
-
Basically, simulate a keyboard when plugged into a computer.
This is really useful if you're using a computer at say, work or school and therefore can't install Keepass XC.
ghost updated
5 months ago
-
index.htm does not come up in a browser.
edit.htm does.
Seems to be an interesting project from the description. Doesn't seem to work though. It would be nice to have known that rather than spendin…