-
hello,
I ssh to the board and setup internet connection,when I input make,
root@analog:~/openwifi/inject_80211# make
gcc -Wall -Werror inject_80211.c -o inject_80211 -lpcap
In file include…
-
Hello,
I've tried to build adrv9361z7035 FPGA bit file from scretch but fail. Fail at ```prepare_adi_board_ip.sh``` process. I got the error message as below. Could you help to advise what may go w…
-
I am using the default SD card image for openwifi 64 bit (board zcu102).
I have recompiled the driver sdr.ko and loaded it into the board, but when I execute wgd.sh I get the following:
```
[ 34…
-
Dear all, It appears acknowledgments are enabled by default and never changed again even when using monitor mode:
https://github.com/open-sdr/openwifi/blob/266e956643d4d12434932d60df55164f7cd49611/dr…
-
Hi, I am not sure I understand how we can utilize ad9361 driver in the new version. I am running wgd.sh and getting the following:
```
[ 931.095708] sdr,xpu dev_probe match!
[ 931.095729] sdr,x…
-
Hello,
after some time I decided to rebuild openwifi for new boards (zynq7020 mostly) but discover I'm not able now.
What should be the process to rebuild the Vivado project?.
I tried to compil…
-
hello:
I'm want to use "Update FPGA" function, but I'm following the quick start and meet the error shown as below when running ./fosdem.sh
root@analog:~/openwifi# hostapd -dd hostapd-openwifi.conf …
-
Hello,
first, thank you for this project,it provided me with a good platform to learn!
My questions are:
· Whether the time slice written is TXOP?(txop=(end-start)?)
· According to the EDCA,ther…
-
Hi.
After making BOOT.BIN file, I've got some error when the device connect to the openwifi board.
The openwifi board transmission the beacon frame for over 2hours and I saw the SSID on the phone …
-
Hi, Xianjun
'openwifi' AP runs well on my zed board + FMCOMMS3 when i operate according to Section Quick start of README.md.
But after changing the country_code from BE to CN, I found the following …