-
Based on the competition in Sydney we want to reduce the number of tasks to:
2 tasks in Housekeeper and Party Host for Stage 1 (GPSR is mandatory)
1 task in Housekeeper and Party Host for Stage 2 (E…
johaq updated
4 years ago
-
any chance that a REFPROP v10 formated fluid file will be available for R-1130(E)?
[trans-1,2-dichloroethene]
this fluid first appeared in ASHRAE 34-2016 edition and it is a component of the blend R…
-
The use of a single heating season and a single cooling season for the Swiss case does not appear to be realistic. For starters, it leads to buildings with high internal loads (e.g., `INDUSTRY`, `RETA…
-
Timo,
setting up a new routine to show Exhaust Gas Temperature on a Maretron250 (since GMI10 doesn't support EGT...)
Maretron supports PGN130312 and not PGN130316, no problems here.
First issue…
-
While working on #1794 it became evident that COOLROOM and LAB do not have process schedules defined for calculating refrigeration loads and process electricity consumption respectively.
In `occupa…
-
The chemical industry denied that there were practical alternatives to ozone-depleting chemicals, predicting not only economic disaster but numerous deaths because food and vaccines would spoil withou…
-
Running reference-case-open. 'B01' is 25% COOLROOM, 'B07' is 50% SERVERROOM.
In the yearly results for B01:
- Qcre_sys_MWhyr, Qcre_sys0_kW = 0
- Qcre_MWhyr, Qcre0_kW = NaN
For B07:
- Qcdata_sys…
-
This is a regression in refrigeration_system.rb
-
So I am using DWSIM to simulate my refrigeration cycle, I have r404a coming out of the condenser at 290 psi and 110F, it then drops across a JT valve. This process works fine as long as the pressure …
-
## What is the problem?
This issue is a work package for issue #407.
For modelling the modular heat pump that is developed in #407, we need dynamic heat exchanger models. Therefore, we want to add…