-
**Original Issue:**
Interface Actuators on BeagleBone Black #12
**Original DoD:**
Successfully implement a simple code, that can run PWM functionality on any of the port pin configured as GPIO on…
-
Hello,
I have ported littlefs to the TI Tiva development kit DK-TM4C129X using a Tiva TM4C129XNCZAD Cortex-M4 CPU and a MX66L51235F serial data flash. I am using the attributes for the file creatio…
-
Texas Instruments' TIVA launchpad is becoming increasingly popular.
I am trying to transfer sensor sample readings from a Tiva launchpad + senshub booster pack to an android device. I was hoping to r…
-
Prefer Digikey
-
Hello gents,
May i ask what needs to be changed to make it compatible with TM4C123GXL? Is it just the can configuration?
-
wxie@guix ~/work/disaster-radio/firmware$ ~/.local/bin/pio run --verbose
Processing ttgo-lora32-v2 (board: ttgo-lora32-v1; build_flags: -DTTGO_LORA_V2, -DARDUINO_LORA, -DHAS_OLED, -I./src; platform: …
-
_From @rei-vilo on March 7, 2014 8:32_
The I²C specifications ([NXP](http://www.nxp.com/documents/other/UM10204_v5.pdf), [I²C-bus.org](http://www.i2c-bus.org/clock-stretching/)) allow the slave to se…
-
I'm trying to connect a BeagleBone Black with a Texas Instrument Tiva C using SPI . On the master BBB I'm using rc_spi functions to configure the SPI pins and send 8 bytes of data to the slave Tiva C…
hjmcu updated
5 years ago
-
_From @rei-vilo on February 11, 2014 23:52_
For the LaunchPad Tiva C Series, there is a potential conflict between names used for identifying the MCU:
- `TM4C123GH6PM`
- `TM4C1233H6PM`
including rel…
-
I don't have a formalized test plan but tried a number of things on my solderless breadboard set up.
exercised input pins:
- x, y, z limits work correctly.
- door works
- reset/panic works
- p…