-
https://github.com/VoronDesign/Voron-Hardware/blob/master/V0_Display/Documentation/Setup_and_Flashing_Guide.md
Contains the line "USB ids --->[ ] Specify a custom step pulse duration"
It should …
-
1) Document how the generic chain should bend around the tool head. The chain shall not be allowed to bend sharply upwards at the tool head as in https://www.reddit.com/r/voroncorexy/comments/sn6f6f/v…
-
This seems to be missing in the repo:
https://github.com/VoronDesign/Voron-0/blob/Voron0.1/STLs/M2_Nut_Adapter_Rotated_x5.stl
-
When printing the `main_body_beta1` in Cura with `Slicing Tolerance: Exclusive`, the supports for these overhangs (the green parts) are not printed at all, so the blue sections are unsupported spaghet…
-
`ssh pi@octopi.local` is supported by Windows via Command Prompt and by MacOS/Linux via Terminal. No reason to list a bunch of different software on different platforms when the same thing works on al…
-
Currently the design depends on nonfree libraries required to work with the proprietary format `f3d` used in proprietary Fusion360 which conflicts with GPLv3 as it requires that the design be workable…
-
Never had a problem printing Voron parts with my v2.4 but this one gave me unexplained artifacts. Lamination is good and the part is strong but there are very visible artifact lines that reflect featu…
zapta updated
2 years ago
-
https://github.com/VoronDesign/VoronUsers/blob/master/printer_mods/Slidr/PanzerChain2.4/stl/xyz_clip.stl
-
i can locate the threaded printable screws for the ercf to mount to the frame, but cannot locate the nuts to lock them in place
-
Hi,
thanks for the nice mod, but unfortunately the notch of the rear plate does not fit into the trident carriage. It's some millimeters to long.
It would be awesome if you can add a second versio…