-
See for example:
```
pip install git+https://github.com/satellogic/telluric.git@master
Collecting git+https://github.com/satellogic/telluric.git@master
Cloning https://github.com/satellogic/te…
-
Hello,
I am trying to start the DonkeyGym environment, but I am getting the following error when I run `python manage.py drive.`
`Traceback (most recent call last):
File "/home/sytasch/ROS/au…
-
Dear all,
I managed to convert the Keras .h5 model to a UFF model. However, when I was following the instructions in https://github.com/NVIDIA/TensorRT/tree/release/7.0/samples/opensource/sampleUffMa…
jqx37 updated
3 years ago
-
I've recently use the master docs to install on an Nvidia Jetson Nano and I had a bunch of troubles. https://docs.donkeycar.com/guide/robot_sbc/setup_jetson_nano/
- The initial install will instal…
-
Does not appear to want to compile for me... :(
Linux jetson-nano01 4.9.140-tegra #1 SMP PREEMPT Wed Apr 8 18:10:49 PDT 2020 aarch64 aarch64 aarch64 GNU/Linux
dkms: 2.2.1.0
```
nano@jetson…
-
requested in donkey car chat. @Chrimo
servos would be enough for the first tests
simple test: connect MM1 to any PC and start firmatatest. Then use the slider to control connected servos. I costs…
-
Hi, has anyone run into these two linked errors?
1. Failed to load the native TensorFlow runtime
2. ImportError: libcuda.so.1: cannot open shared object file: No such file or directory
Thanks i…
-
Hi,
I'm on the calibration step now with my servo in channel 1 and throttle in channel 0. I can get my servos to rotate left and right using
`donkey calibrate --channel 1 --bus=1`
but nothing h…
-
Anyone tried LI-IMX219-MIPI-FF-NANO camera to get 120FPS? Is there benefit to train with 2x CSI stereo cameras at 120FPS?
However I tried tub manage that didn’t work with camera_a and _b and p…
-
would this project work on raspberry pi2 ? does it need inbuilt wifi module?
I'm planning to setup rapsberry pi using ethernet cable.