-
After successfully loading `micropython-fomu.dfu` onto Fomu (and once the LED starts pulsing red) it does not show up as a `/dev/cu.*` or `/dev/tty.*` device.
No additional serial drivers are insta…
-
Perhaps https://github.com/ormf/cm and related cm-fomus.
-
Below is an error I get when trying to make verilog blink minimal. Regular verilog blink does work however. What is a compiler directive and why is it missing?
Yosys c7f1368cd273f1d84507d29548…
-
Issues;
* `Product: Fomu Bridg` -- Missing `e`?
* `can't set config #1, error -71`?
```
[286448.555178] usb 1-2: USB disconnect, device number 8
[286448.902061] usb 1-2: new full-speed USB de…
-
## Background
I'm trying to enable users to write documentation in the more common Markdown format, rather than forcing them to learn reStructured Text. As such, I'd like to use something such as …
-
dfu-util.exe -D micropython-fomu.dfu
fails at 36%
dfuerror status(8)
:(
-
I couldn't get the provided MicroPython firmware to work at first. It seemed to flash fine, but afterwards no `/dev/ttyACM*` were created. I thought I didn't have the right USB serial driver before I …
-
Using the fomu from camp
steps to reproduce:
```bash
cd litex
python3 workshop.py --lx-check-git --board hacker
dfu-util -D build/gateware/top.bin
```
dmesg output:
https://gist.github.com/yor…
-
was:
PATH=[path-to-bin];%PATH
should be
SET PATH=[path-to-bin];%PATH%
-
Something changed, and now
```powershell
smcro@CUBOID yosys-bld D:\Code\HaD\valentytest master ≢ …