-
I have a large bed and lots of points, could the z scale be set by the user? 2mm off seems catastrophic, I’d like to set it to something like 0.5mm so I could better see small variation
-
Heho.
I tried to print the little Testship first normal and after this with arcwelder.
Slicer is Ultimate Cura:
Is there a config wrong or is this a bug?
**Normal:**
Gcode: [AI3M_3DBenchy.gco…
-
Modal Dialog Setup Wizard blocks everything.
Only 2 buttons [OctoEverywhere] which does nothing and [Previous] which is grayed out. No way to close/cancel/next. The only way to fix - uninstall plugin…
-
OctoPrint 1.3.6 running on octppi 0.13.
My Printer's physical bed size X400 Y250. My Octoprint Printer profile reflects that.
Still, Visualizer showing square grid which does not represents the actu…
-
## Feature request
I need to be able to go from a point 5cm into each direction and probe down the Z axis and get a list of all coordinates with 1mm spacing on X/Y axis. (as CSV file. bonus is ofcour…
-
I managed to install this - but when i reload the UI i see the following:
` You haven't yet decided on whether to enable or disable anonymous usage tracking. You need to either enable or disable it…
-
I know that this is a bit long but please take your time and fill in the following information as clearly and detailed as possible. It will shorten the time needed to understand and fix the issue sign…
-
Thanks for what I expect would be a TERRIFIC plugin... if only I could get it (or maybe Cura) to work!
I believe I've tried everything but no-go. Cura works properly with OP but no thumbnail icon a…
-
## Feature request
## Problem description
### Expected Behavior
### Actual Behavior
### Steps to Reproduce the Problem
1.
1.
1.
### Specifications
#### Version
…
-
#### What were you doing?
While attempting a multi-extrusion (a single object with another material at certain layers from a second extruder) print from a gcode file sliced directly in Slic3r and imp…