-
### Robot Name 🤖
ergoCub 1.3 S/N:002
### Request/Failure description
The joint goes in hardware fault because of clearly bogus readings
### Detailed context
Here the error messages:
```
792.3694…
-
### Motivation.
`vLLM` has already been adapted to many hardware devices, such as `GPU`, `TPU`, and `XPU`. However, adapting these backends requires implementing separate `Worker/Executor/Model Run…
-
Hi, I'm trying to build a drone (esp32c3-based) inspired by an esp-drone project and I've got a problem with power supply.
Whenever the motors start spinning more than ~20% of their max power, **the …
-
Hi,
I would like to contribute and make some changes to the Hardware. Could you please also upload the KiCAD project?
Changes I propose:
- Have a soldered jumper to also run GPS off of 5V or 3.3V.
…
-
Hi,
It is a fantastic method for analyzing spatial transcriptomics!
I tried to train ConGI on a workstation with a GPU (RTX A4000) with 16.9 GB VRAM. But I encountered a problem named"cuda out of …
-
Hi,
I have a roland sc-55 connected to my computer with a usb to midi cable, is there any way i can configure this plugin to output to the sc-55?
tevey updated
1 month ago
-
### Bug Description
There is an unexpected failure from our `unwrap_or_bypass_with` for `getaddrinfo` detour when bypassed with `Bypass::NullNode`
### Steps to Reproduce
Simply run `python3 -m http…
-
-
More of a request: Is there a hardware schematic documented to what pins are being used and what LED location to what pin?. To determine if can stack another shield/hat. I wanted to see if i could sta…
-
Toradex has a very clear standard for hardware ids, which is `family-soc` so `verdin-am62` or `colibri-imx8x`. Common Torizon and Torizon seem to not follow a standard.
I suggest we decide on a stan…