-
I was playing with the API and called `bladerf_set_sample_rate()` with parameter 100e6, which seems to have messed up my device because I'm now getting constant timeouts when I try to read samples wit…
-
> ```
> In file included from /home/travis/build/LMMS/lmms/src/core/ConfigManager.cpp:245:0:
> /opt/mingw32/i686-w64-mingw32/include/shlobj.h:37:3: error: 'EXTERN_C' does not name a type
> SHFOLDER…
tresf updated
9 years ago
-
See here:
https://github.com/Nuand/bladeRF/blob/master/host/common/include/host_config.h.in#L179
Should also check what MSVC 2013 does WRT `inline` now that the MS folks added some C99 support.
jynik updated
9 years ago
-
Hi,
So while I was writing my Haskell binding I noticed:
https://github.com/Nuand/bladeRF/blob/master/host/libraries/libbladeRF/include/libbladeRF.h#L62
Now would it not make sense to make this into…
-
The FX3 firmware built from [HoopyCat's automated build system](http://hoopycat.com/bladerf_builds/) has an issue where the linux kernel reports:
```
[15554.022841] usb 2-4: Not enough bandwidth for …
-
I'm getting the following message saying I need to update my firmware:
```
C:\Program Files\bladeRF\x64>bladeRF-cli.exe -i
[INFO @ usb.c:473] FX3 FW v1.5.3 does not support the "device ready" query.
…
-
In https://github.com/Nuand/bladeRF/wiki/FPGA-Autoloading there are some scary "Important" remarks.
These make me a little nervous that one day I will forget to check the LED's have come on before pl…
-
Are the following messages "normal" with the new power savings mode (when not receiving UAT) ?
The timestamped lines make sense but all of the "failed with -4" are worrisome.
```
2015/12/31 15:58:07…
-
From time to time libbladeRF fails to upload the firmware to the FPGA after USB2 cable is connected to the board. I noticed it twice when trying to run gnuradio flowgraph using osmocom source and sink…
-
While FPGA v0.1.1 introduces timing constraints that addressed, LMS accesses still appear to fail.
It was reported that tuning to 1.575e6 and running a `cal lms` fails with RXVGA2 values coming back …
jynik updated
9 years ago