-
Due to repo cleanup, I'll post most recent firmware here for a moment.
[eth-scpi.dfu.zip](https://github.com/sinara-hw/Booster/files/2371280/eth-scpi.dfu.zip)
- Updated HW Int calibration procedur…
-
After being on for a few weeks, a Booster stopped responding to commands or outputting logs on the USB serial port. The ethernet SCPI interface still worked. After unplugging and replugging the USB po…
-
As a LET scientist, I want to use a Heliox 3He sorption Fridge on LET, so that I can perform cryogenics experiments.
#### Acceptance Criteria
1. I can control the temperature of the Heliox 3He sor…
-
ESP: Provide extended syntax definition for commands and queries
ESW: Use above mentioned definition when copy selected command or query to command line
Add definitions of expected SCPI command an…
-
As a developer, I want command builder to have the option to ignore variables in commands,
For example, in the command `CmdBuilder("set_example").escape("SCPI:CMND ").int().eos().build()`
The corre…
-
I am trying write some commands to Keithley 2000 multimeter, but i am getting that specific error, any ideas?
Traceback (most recent call last): File "C:/PyTests/Keithley.py", line 4, in keithley …
-
Has anybody written a python socket interface yet for Booster? However bare bones. I know it's not hard but I'd rather not duplicate the effort if it's already been done.
I can successfully inter…
-
After power-cycling the Booster, channels 0 and 4 reliably (N=5) go into "error" after ~2s (the other channels show "interlock tripped"). There are no errors shown via logstash.
There are clearly s…
-
Currently, the VCP has a lot of diagnostic noise, that can't be suppressed (power calculations, temperatures etc). That's a bit annoying since it interferes with scraping the outputs (e.g. to log bias…
-
@wizath the output power interlock calibration does not seem to work properly. I am trying to calibrate the low-power point following [your instructions](https://github.com/sinara-hw/Booster/issues/15…