-
### Bug Description
I got a problem with Anet a8 plus, My capacitieve sensor goes outside my bed to measure, when I try to auto level.
I use marlin 2.0 and search everywhere for the solution. …
-
Hi again,
I had an interesting accident that I'm curious about with V2.0.
Setup was:
#define RPI_DRIVER
#define RPI_ILI9486_DRIVER // 20MHz maximum SPI
#define TFT_CS PIN_D8
#define TFT_DC…
-
TFT screens with optional touch panel can be used to control Marlin
Low-level IO uses DMA for background data transfer to TFT screen to minimize impact on Marlin's performance.
Current low-level I…
jmz52 updated
3 years ago
-
Hello, where does the processor type switch?
I can not find where the conversion of STM pins to ARDUINO takes place ??? that is, PA1 in 10 pin arduino? I'm trying to build a marlin for the Robin 2 bo…
-
Hello Bodmer,
still awesome job with this library.
With the setting and configuration in parallel mode with an Ili9488 Shield i am also able to use a ST7796 Shield. Both are 3.5" with same resol…
-
BLTouch is not centering to the build plate on z_safe_home. The position it homes to is center of build plate + the nozzle offsets. This results in the printer head homing to the front left corner of …
-
### Bug Description
Nozzle to probe offset is ignored. Probably on X and Y axis.
### Configuration Files
Not relevant
### Steps to Reproduce
Compile latest 04c4c6004e752582235357b14aebd…
-
i tried to Print Multi Coulor (E.G White Black Blue) Throu Singelnozzle Diamond Head. Butttt... My Firm is Changing different Temperature and all everything it have to do to Print other extruder but t…