-
Hi,
I have recently configured Teacup Firmware to work on Arduino Uno with 4 Pololu stepper drivers, but how to set Teacup to be used on Delta Printer?
Is there any implementation of Delta Kinematics …
-
Still very excited.
I think I'm not far from actually printing something. All the motors work, however they are not precise. When I play with the numbers in the config such like `STEPPER_PULSES_PER_M…
-
Ok ladies and Gents I have been googling without success.
Stock Ender 3 pro
BLTouch v3.1
I have upgraded(!) to an SKR 1.4, with TMC2209 stepper drivers. When I try to home all axis, I keep gett…
-
The [`AccelStepper`](https://www.airspayce.com/mikem/arduino/AccelStepper/index.html) Arduino library is able to group stepper motors together and move them in sync. We should explore this feature.
…
-
Hi
how looks your wiring for UART for the tmc stepper ? are you using the Trigorillia board V1.0 or V1,1 ?
-
What is the maximum z-feedrate others have been able to handle on the Wilson?
((3rd number in `#define DEFAULT_MAX_FEEDRATE {...}` in Marlin))
My threaded rods gave horrible screeches when my z-axis …
-
**Particle** proton
**Energy** 0.1 GeV
**Distance** 2 m
**Uniform magnetic field** 1 tesla
**Quadrupole magnetic field** 1 tesla/m
**Stepper** DormandPrince745
|Magnetic field |Error Toleranc…
-
Hello, i just installed the 1.22 release.
During the compilation, i had some warnings but i was able to start it. The application seems to not have access to the GPIO (i made tests on lasers and moto…
-
Hi my friends, I have a doubt.
looking on the internet, I found a hybrid closed loop stepper motor, with an encoder to avoid missing steps.
https://es.aliexpress.com/store/product/57-closed-loop-57B…
-
I installed the TMC2208 stepper drivers, and then installed the marlin firmware for new drivers without connections reversed. The Y and Z axis work, but the X axis will grind if I try and drive it, an…