-
When I do an install a bunch of unnecessary files are copied (all of `/usr/bin`.)
I am working on [this](https://github.com/konsumer/docker-gb-dev) complete docker dev environment for gameboy. It c…
-
Problem summary
Cura 4.6.1 creates a few lines of code at the beginning of the G-code file that over-ride machine settings and one is very much incorrect and sets the max machine speed to 8mm/s
(als…
-
I'm looking at building some support for the Am9511 on a z80 platform, and part of that effort would be translating from fixed to float (and back to fixed) representations.
There are some uclibc (a…
-
So i followd your new instruction on BLTouch. But its not trigering. Also when i unplug the probe pins its triggered.
Heres my config
; Configuration file for SKR v1.4 (firmware version 3)
; ex…
-
### Work environment
| Questions | Answers
|------------------------------------------------------|--------------------
| OS/arch/bits (mandatory) …
-
> Thank you for this nice library!
>
> All functions I've tested are working fine, but only if I wait for the arm to idle before I send the next movement. Edit: Only for the first movement after the…
rirze updated
4 years ago
-
Hi,
I had a look at your Ace and it looks very good. I'm doing a similar project I did find that I had to boost the composite sign before I could get a monitor to sync I used this circuit. https://ju…
-
The ROMWBW code does the following to set up the Z180 wait states
; SET DESIRED WAIT STATES
LD A,0 + (Z180_MEMWAIT
-
# Architecture
## To be done
- [ ] Cortex-A7
- [ ] Cortex-A12
- [ ] [Fujitsu FR (comes with source code)](https://github.com/radare/radare2/issues/671)
- [ ] H8/300L, H8/300H, H8S/2000, H…
-
Some discussion in #337 : https://github.com/z88dk/z88dk/issues/337#issuecomment-329352853
The specific examples given are ChaN's FatFS, AVR time.h, and Free RTOS. We may not want to integrate the…