-
Hi,
I have a CTC bizer 3D printer with dual heads.
I am running OctoPi on aRaspberry Pi 3 B.
My current problem is, that the heated bed temperature always switches back to "off", what ever I do.
…
-
### Version
1.41.1 windows
### Operating system type + version
Windows 10
### Behavior
Setting a negative value to "extra lenght on restart" generate holes in solid surfaces/infills
* Set a …
-
Any time I am supposed to receive a message with an image from the server (such as after sending /status) the response message is never received. It works fine when I turn off the mjpg-streamer server…
-
### Package
filament/filament
### Package Version
V3
### Laravel Version
11
### Livewire Version
_No response_
### PHP Version
8.2
### Problem description
I am facing issue with filament an…
-
The "Wire Printing Top Delay" setting is supposed to insert delays after vertical wires, but setting it to a non-zero value doesn't insert G4 delays in the gcode.
Looking at https://github.com/Ultima…
-
We bought a Palette 3 Pro in order to provide automated spool swapping for a large format 3D printer we're working on. This printer uses 1.75 filament, and we normally run it with a 1.2mm nozzle and .…
-
Hello, I would like to contribute but I am not sure if I can make these with PLA or if I would need to use ABS or other types of filament. I currently can only print PLA.
Will that suffice for this …
-
### Package
filament/filament
### Package Version
v3.2.124
### Laravel Version
11
### Livewire Version
v3.0.0
### PHP Version
PHP 8.3.9
### Problem description
the 'notificationsSent' event…
-
Hey MakerGear,
I'm designing a full printer setup and I'd like to use a large set of MakerGears. Are there any 3D models of the entire machine available? It would enable us to make full renders featu…
-
In the infill settings it describes 70% as solid, however it would be extremely useful to offer the option for the whole shape to be printed solid. In my case for when printing with transparent filame…