-
There is currently about a 3/4 chance that the filters initialize incorrectly and output noise or high-harmonic signals. Likely the HBF even/odd timing.
-
https://github.com/apertus-open-source-cinema/nmigen-gateware/blob/4514d62f1b802f4f73e73311c5696dfb4118c246/src/cores/primitives/xilinx_s7/io.py#L34
This is invalid, and generates warnings in synth…
-
I ran in to this while working on [my port of Bob Miller's Icebreaker Candy](https://github.com/kbob/icebreaker-candy). That project (ab)uses XDR pins to get effectively 2x resolution on a handful of …
-
Hi Rob, everyone,
After upgrading to latest head in master and updating pandas etc. I am trying to run a backtest with estimations. I believe I have updated arctic data for the latest version of th…
-
Hi,
first, thanks for this awesome project!
I am trying to use it with the Makeblock Laserbot and their MegaPi board.
I mapped all the pins, but my last problem is the laser pin. The MegaPi uses …
-
Unfortunately I do not have the usual logging because it takes a lot of usage to get to this point. I do reboot the machine at the end of the day, but what I do is run tmux-resurrect, which restores a…
-
Running 4.6.1 on Win 10
Issue: when performing interpolated, curved combing / rapid moves, the printer makes a low frequency "grunting" vibration. I believe this is because with accel/jerk settings…
CCS86 updated
4 years ago
-
Hi,
I tried to use motion with my RaspberryPi model A+ and a NoIR camera module. I can open the webinterface (http://raspberrypi1:8081) and it appears working for a while, but after a few
frames, …
-
I wrote up a procedure for doing so in the attached note.
@jkcshea let me know if it makes sense and looks feasible.
Here's a demonstration of why I think it will work:
```r
library("ivmte")
…
-
Hi,
in the procedure to create the BSP for the Jetson NX, when the command "INSTALL_MOD_PATH=../Linux_for_Tegra/rootfs/ make modules_install" is sent, a message of access denied appears. If the comma…