-
Selecting boost preset results in my ventilation being set to 0%.
Same happens also via my automation which used to work fine.
```
service: fan.set_preset_mode
target:
entity_id: fan.nibe_830…
-
Creating this thread to solve issues and make it work with the S-model VVM325
Regular manual: https://www.nibe.eu/assets/documents/14743/331115-1.pdf
Modbus manual: https://www.nibe.eu/download/18…
-
Hi, im trying to configure Olimex esp32-poe, everything seems to be running, but i dont think its sending out udp packets, tried to point target after laptop and listen on wireshark, but there is noth…
-
The nibegw software incorrectly assumes all addresses are 8 bit and the start byte is always followed by 0x00. This is incorrect for 2120-8 pumps. These pumps will send a sequence of "5c 41 c9…
-
Hi!
I've succesfully managed to install the integration; but now trying to find out which data my heatpump shows through its Nibe uplink API.
If I understand correctly, one could do a API GET re…
-
In the as I'm writing latest Home Assistant-release, there's an energy dashboard (https://www.home-assistant.io/blog/2021/08/04/home-energy-management/).
It would be nice if relevant sensors could …
-
@yozik04 thank for the effort supporting NIBE protocols for mqtt.
I would like to ask it is possible to add support for the S-Series SMOS40 controller over the TCP Modbus.
I am attaching the compl…
-
Hello,
could you please help me with this type of error in homebridge? Everything was ok for some time but today I checked homebridge for update some plugins and this error was there in main log.
…
-
Is there a way to add the ability to change settings in the menu for degree minutes. Meny 4.9.3
-
For my oldest daughter in 3rd grade the 'ugeplan' is populated.
For the youngest in 0 grade there is no data.
Looking in 'minuddannelse' I see data for both.
'ugeplaner' in this integration app…