-
Please include https://github.com/mcci-catena/Catena-Arduino-Platform in the list, thanks.
-
Hello all,
I'm running a dragino LoRa Shield v1.4 on an Arduino Uno on 433 MHz.
Arduino reports me the following error:
FAILURE ...\radio.c:750
I have no clue, where to start from the debuggin…
-
See https://github.com/mcci-catena/arduino-boards/issues/11 -- we need to change to `ARDUINO_MCCI_CATENA_...` symbols.
For backward compatibility, we'd better define `ARDUINO_CATENA_..`. as well.
-
This library, which is a C++ wrapper for the LMIC library, is used by multiple clients. We would be grateful if https://github.com/mcci-catena/arduino-lorawan were added to the library list.
-
The pre-declaration of RTC cause error with M0 processors as RTC is predefined in the Atmel CMSIS-Atmel libraries...
I might suggest: or leave it to the user to create the instance define in his p…
-
We need to add peripheral power management.
When class begin and end calls, we should put peripheral clock on and off to save power.
-
_Originally posted by @terrillmoore in https://github.com/mcci-catena/Catena-Arduino-Platform/pull/84_
-
Please add MCCI's utility library to the list: https://github.com/mcci-catena/Catena-mcciadk
-
I thought I would simplify the issue and start a new thread. I hope this is OK.
I was able to fix the last issue but I can't get my sketch to compile. To take my sketch out of the discussion, I…
-
According to STM32L0x2 reference manual, unique device ID register 2 offset is 0x14, but STM32L0xx_HAL_Driver use offset 8 as below.
https://github.com/mcci-catena/Arduino_Core_STM32/blob/995b1087c…