-
Is there a plan to add DSSS / 802.11b support, and if so, what is the timeline? How difficult would this be?
-
Hello,
I checked the frequency and there are 25 channels until now.
sdr0 25 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
…
-
Hi,
In this step:
Open Block Design
Tools --> Report --> Report IP Status
I get the following error:
```
[BD 41-1273] Error running post_config_ip TCL procedure: unexpected "," outside functi…
-
Please check this. There is no files in /zc706_fmcs2/ip/openofdm_rx after the make step.
Thank.
Jinsan Ko
-
Hi
I want to know that what is data format of IQ in 16 bit in receive side?
In demodulater.v why scaling is taken 1024 though input is in 16 bit?
Regards
J S Hyanki
-
利用做好的镜像文件用zc706+fmcomms3进行实验时，工作在ap模式，终端链接会出现kernel panic。重新编译kernel，无法建立sdr0网卡。
-
Problem to start pre-built image from https://users.ugent.be/~xjiao/openwifi-1.0.0-ghent.zip
SDCARD is created using
sudo dd bs=4M if=openwifi-1.0.0-ghent.img of=/dev/sdc
console out is:
roo…
-
* KOReader version:2020.8
* Device:Moan w7 eink reader (Android 8.1)
#### Issue
**Crash when login evernote (China or internation region)**
#### Steps to reproduce
**open setting -> evernote->l…
-
Hello,
First I want to say thank you so much for all the effort and time you have put into this project! It is truly (at least in my eyes) a major milestone, and you should be proud of yourself... …
-
In file sync_long.v line 418-421, the original code is
stage_X0