-
I'm attempting to boot this on a rock64 v2 1gb ram. I flashed the image to microsd with balena etcher and connected serial port to terminal on my computer to capture the boot.
I cant seem to get i…
-
For armv8a profile ports, when building stack in tx_thread_stack_build.S, the SPSR initial value is 0xC (program runs in highest privilege and EL3 defined). In this case, the program will use SP_EL0 a…
xjbwd updated
2 years ago
-
```
U-Boot SPL 2021.04 (Jun 25 2021 - 13:42:25 +0000)
DRAM: 4096 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.4(debug):11.19.1-v32-Pre-2762-gc8c226c-70-g724b08c3
NOTICE: BL31: Built : 13:33:18…
-
作者你好,
我发现在你的两篇文章里(MVSDF和Vis-MVSNet),对于Vis-MVSNet在DTU上的evlauation的结果的差距比较大,如下图所示,一个是0.88,一个是0.365。如果我没有理解错的话,Chamfer(L1) 就是Acc. Comp.的平均数,也就是overall。如果两个指标应该是同一个意思,为什么在两篇论文里会差距这么大呢?请多多指教,谢谢!
![image]…
-
Standard chat template, no routine, no chat.
标准聊天模板,无套路不聊天。
**Device Information | 设备信息**
- SOC: S905l3b
- Model MGV2000
**Armbian Version | 系统版本**
- Kernel Version: 6.0.13
- Release: j…
-
Standard chat template, no routine, no chat.
标准聊天模板,无套路不聊天。
**Device Information | 设备信息**
- SOC: [s905l3b]
- Model [cm211-1]
**Armbian Version | 系统版本**
- Kernel Version: [6.1.18]
- Rele…
-
On [my new Ampere Altra system](https://www.ipi.wiki/products/ampere-altra-developer-platform?variant=42086027133090), I cannot boot a `CONFIG_LTO_CLANG_THIN=y` kernel at `next-20230106`. My Honeycomb…
-
### Describe the bug
The latest SNAPSHOT of the Redmi AX6000 is unable to boot and results in a boot loop with the error message
```
ERROR: Failed to allocate 0xb000 bytes below 0x6c000000.
Fa…
-
According to the section **Encoding and use of Banked register transfer instructions** from the ARMv7 architecture reference manual:
> This means that, for each mode, the registers that cannot be ac…
-
Standard chat template, no routine, no chat.
标准聊天模板,无套路不聊天。
**Device Information | 设备信息**
- SOC: [e.g. S095x3] 有散热片,拆不掉,不知道SOC信息
- Model [e.g. HK1] 创维E900V22E
**Armbian Version | 系统版本**
-…