-
Testing in India by TTN Chennai/MCCI revealed that the Conduit was not fully functional:
1) uplink on ch#2 and downlink during the second RX slot worked
2) uplink on ch#0 and ch#1 didn't work.
In…
-
hi,
can i use sx1276 Concentrator in this project?
-
Hi,
I would like to access the DevAddr (MAC address) of the received packets. The util_pkt_logger tool has a "TODO: need to parse payload" next to the device MAC address.
However, the sx1301 datas…
-
anybody could tell me ?
how can i get the demo board or the Schematic diagram ?
Thank you so much...
-
Get "CRC error, damaged packet",when run ./test_loragw_rx 435.425 410.425,only 2% packets are received correctly,who known why?
wx-ta updated
5 years ago
-
We are having a clock issue with the packet forwarder.
The clock used for checking at the JIT queue appears to be non-sequential, but the clock attached to uplinks appears to be OK. This causes all d…
-
Hi,
possible change software (add #define ... to library.cfg for example) so i can use GPIO mode 2 and GPIO0 as "rx_buffer_not_empty" on PIN7 to implement interrupt mode on RPi ?
Thanks in advance…
-
I download the patch file of I CUBE LRWAN 1.1.5
When write the command to patch it give me this error:
$ patch p1 < sm42-lrwan_v1.1.5.patch
patching file p1
Hunk #1 FAILED at 138.
patch: **** C…
-
### Out of index panic occurs when the gateway channel in loraserver is set to be greater than 8.
if multiSFCounter >= channelCount {
return gc, errors.New("gateway: exceeded maximum number…
-
Using the code form the current master branch (0.3.0) I am receiving `Error processing the message The given key '6' was not present in the dictionary. ` for devices from one particular device manufa…