-
PCb files are missing
I would like to see how you implement RF tuning from the Chip to the SMS connector ,
quite new to this
also is there a mode on the ship to show how well the VSWR or signal …
-
I have a python program that works exactly as intended, it writes AT commands to the SIM7000E to send an SMS message under various conditions. My problem is that following a reboot of raspberry pi (a…
-
Hello, i'm trying to update the firmware but every time software is stuck in the waiting to switch to download mode...
In that time i see qhsusb_bulk is unknown in device manager.
Tried to find a …
-
I am looking for a telnet logging method, that basically only send logging to the telnet client.
The code in which I want to implement it contains a very long running loop(), which will make the ```S…
-
Setup: Arduino Uno board with the Bothletics Sim7000a shield on top with a LiPo 3.7V 2000mah battery connected as well as the USB plugged into the UNO to the computer,
We are using LTE_Demo example…
-
can we post data to https server ..??
-
At several different point, sometimes the program goes into a loop, because the sim7000 starts to repeat the commands instead of replying with OK.
This happens at more places, during GPS, during Co…
-
When using the SIM7000E with an NB-IoT-only SIM (no GPRS support), CREG never returns the correct status, only 0,0 or 0,2.
CGREG however works as intended. Could this be changed in getNetworkStatus?
tbitu updated
5 years ago
-
Hi,
Just tried the B05 firmware but couldn't setup PPP over UART anymore:
```
-> AT+CGREG?
AT+CGATT?
AT+CPSI?.
AT+CGPADDR.
AT+CGNAPN.
ATD*99***1#.
ATD*99***1#.
-
## What type of issues is this?
I'm trying to get the MQTT example working.
Before attempting that I ran the diagnostics example. No problem there as you can see:
```
Wait...
Initializing mod…