-
Triple checked I'm using the right credentials. Is it possible you're only connecting to Region 1?
-
This script worked fine for a few days and today it fails with the following:
```
Traceback (most recent call last):
File "e:\Github\sunsynk-api-client-main\get-inverter.py", line 62, in
ru…
-
### Web browser
Firefox
### Web browser version
117.0
### System Health details
## System Information
version | core-2023.9.0
-- | --
installation_type | Home Assistant OS
dev | false
hass…
-
### Issue related to
Sunsynk / mbusd Home Assistant Add-On
### Describe the issue/bug
When I set any of the time of use voltages to anything (47.5 - 54.5V), the inverter always sets the volta…
-
### Issue related to
Sunsynk Home Assistant Add-On
### Describe the issue/bug
I want to add register 206 (grid trickle feed) sensor definition, while official sunsynk app and web interface do…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
When grid ON it displays icon OFF grid.
When no sensor attached to the card it displays ON g…
-
[hello,]
I followed your tutorial but I have feedback at 0 in home assistant. I do not understand ...
I have model SUN-6K-SG03LP1-EU
In the menu I am in MASTER modbus sn:01
Attached yaml file + …
-
I am experiencing the same issues as described in this ticket:
https://github.com/kellerza/sunsynk/issues/33
I have tried removing the termination resistor however the issue still persists. Could …
-
Hi there
I recently had a Sunsynk 12kw 3-phase inverter installed, but I'm a little unsure if this integration works with this model.
I purchased a USB-RS485 cable from Solar-Assistant (https://so…
-
Today i was discharging my battery to the grid and the flow has the wrong direction. Dot is going towards battery instead towards the inverter
Also I think value of wattage should be negative for …