-
Hi,
When i run the app in video only, it works fine.
But When i run with osd then the app will crash.
In stereomode it will crash as well.
Can you add the option stereo without osd?
I use it with…
-
Hi Rodizio,
First off, I wanted to thank you for all the work you've put in to this, it's really made it very easy to get up and running with wifibroadcast. I have run in to an issue using SPI devi…
ah257 updated
6 years ago
-
Thanks a lot for removing all the regdomain stuff from the Realtek driver (https://github.com/aircrack-ng/rtl8812au/commit/ec103e0fa66aaac4d7349bffbfd73e4f3256452e)
I figured you guys could have a …
-
Some parameters now in the section
**# Common settings (need to be kept in sync for both TX and RX!)**
Should not be there, for example:
SHOW_BITRATE
DATARATE
VIDEO_BITRATE
BITRATE_PERCENT
see…
-
@rodizio1 I just spent the entire of yesterday trying to find out how wifibroadcast auto-started. I went through: rc.local, .bashrc, init.d directory, systemd & cron auto-start systems (_Google was my…
-
Two queries regarding transmitting multiple video streams:
1 Would I be correct to assume that I can tx/rx multiple video streams by executing tx_rawsock twice configured with two different ports …
-
I've been able to get telemetry OSD on RX just a couple of times but not matter how hard I try it does not work anymore.
Attached a keyboard to TX, on tty2 I see the packet counter increasing so I …
-
Right now, I'm running a setup with Cleanflight and a Raspberry Pi that receives LTM telemetry from the FC and also sends MSP R/C commands to the FC. On the Pi, I use the same serialport for this. In …
-
I've recently tried to upgrade the firmware to the one from the latest Raspbian image (2017-04-10). Now the system doesn't boot anymore. It doesn't even initialize the display, HDMI monitor shows "no …
-
Hello I just upgraded wifibroadcast,and my setup with rtl8812au en receiver side for wifi acces point don't work anymore.
I return back to 1.6 rc2 and it work perfectly.