-
Hi. I've tried to make it work using SDIO after failing with SPI (#92) but it became another failure.
Using official `ESP-WROVER-KIT` (v3) board and `Raspberry Pi 3 Model B V1.2`.
On ESP32 I've …
gediz updated
2 years ago
-
i everyone, I started building an hexacopter (flame f550) using a raspberry 4 and the orange cube with optical flow and a leddar One. I have installed mavros. I’m trying to get the raspberry to commun…
-
### Issue details
I need to inject some messages into the telemetry stream, so I've disabled mavros' gcs_url. Trying to run `gcs_bridge` alongside mavros results in the following error:
```
[ER…
-
**Describe the bug**
After switching on the RPi 3b the rainbow color screen is loading and the Raspberry Pi Logo is shown. Afterwards the display switches off and stays off. Starting with a hdmi cabl…
-
Hello
We are experiencing "No room to store incoming packet" error on certain conditions. The source multicast is from a professional encoder (Tandberg)
**Condition 1:** When TS bit rate of s…
-
**Describe the bug**
A raspberry pi Zero in HID gadget mode cannot wake host computer.
**To reproduce**
Enable `dwc2` driver and reboot:
```sh
echo "dtoverlay=dwc2" | sudo tee -a /boot/confi…
-
Hello,
i see error after
## insmod esp32_sdio.ko
esp32_sdio: loading out-of-tree module taints kernel.
esp_probe: ESP network device detected
Rx Pre ====== 0
esp_handle_isr: CMD53 read/write e…
x893 updated
6 months ago
-
I’m currently attempting to digitize a number of Hi8 and Video8 tapes. These tapes are as-is from the camera; as such, there are imperfections in the originals recordings, including blank sections bet…
-
### Summary
We found a use-of-uninitialized-memory error while testing the `encoder_heic_fuzzer` fuzzing harness for ImageMagick. Upon further inspection, this issue seems to be related to an externa…
-
Very related to https://github.com/Xpra-org/xpra-html5/issues/13 and https://github.com/Xpra-org/xpra-html5/issues/4#issuecomment-868275246
@basilgello @totaam
There is a situation where setting …