-
## Feature request
## Problem description
UGCS crashes when a file is loaded that does not have a basic movement.
### Expected Behavior
Some kind of warning, or note that informs the…
-
Bed Visualizer always seems to show only the last mesh it stored from its own probe, despite having done probes at the beginning of a print (and store them) via my gcode header. I also sometimes do b…
-
This is awesome! However... for me in both Chrome/Firefox I find that the tabs all get pushed below the Connection/State/Files elements at the left of the screen, rather than going alongside them.
…
-
## Feature request
## Problem description
I am able to jog X, Y, and Z axis using UGS. I have hardwired limit switches which I have tested as well. When attempting to home, I receive the fo…
-
I know that this is a bit long but please take your time and fill in the following information as clearly and detailed as possible. It will shorten the time needed to understand and fix the issue sign…
-
## Problem description
UGS keeps losing it's connection to the controller, causing the job to stop midway through. I am running UGS on a Raspberry Pi 4 (4GB) and my controller is powered by an A…
-
Hi, i'm using last nighty build of UGS Platform, and i have Arduino Mega 2560 with GRBL 1.1f.
I'm working with a large G-code files(aroud 1-2 million rows), which have onli G1, G0 and M3/M5 commends.…
-
First off, LOVE LOVE LOVE the new version, with the ability to change scale and colors!!!
**Describe the bug**
Clicking "Home" in display causes a previous bed level probe's results to appear as v…
-
The "Print complete" notifications are being sent to early, when im printing something where the last layer takes around 10 minutes, at the start of that layer (around 2 minutes in) the push message i…
-
I've been using ugs platform to cut relatively big job (21MB g-code) and everything was cut perfectly. Job was finished in two hours. But when it stopped the ugs was still showing like 80% (10 hours a…