-
My layer(s) always seem to be tilted on the build plate. With tilt I mean that on the left side the nozzle seems to be too high (1) and the right side too low (2) compared to the middle (0). It doesn'…
-
Hello everyone
First time posting and also not a pro but almost sure this is an issue.
I have an Archim2 board i am building into a lulzbot taz 6. I have connected the hotend probe wire to the PB…
-
In UMK3 there are High Punch/Kick commands mapped to first buttons, afaik must be the Low Punch/Kick commands at first, like the others MK games.
-
For discussion and info exchange on support for FuriousFPV's Innova VTX.
The Innova basically seems like M328P driving MAX7456 and FX758-2. A vendor modified (and not yet disclosed) version of MWOSD …
-
-
The Electrical Engineer will be primary motivator and contributor to the analysis, conceptual design, development, and testing of electrical circuit boards, cables, power supply box and wiring harness…
-
Once fitted does the car software automatically detect the heated wheel? I.e does the heated wheel control icon appear on the touchscreen app?
I'm considering fitting a heated wheel to my MS60 whic…
-
```
function drl_lights() {
if (config.lights.drl !== true) return;
if (config.lights.drl == true){
switch (status.vehicle.ignition) {
case 'off' : drl_power_state = false; break;
de…
-
Is the pinout for external drivers the same as for the standard version of GRBL?
-
I have the 4in1 wired to the kiss v2 fc using the traditional wiring harness. After updating the 4in1 from 1.0.29 to 1.0.65 the KISS passthrough no longer works and the fettec configurator cannot dete…