-
- les_main (Wim original) always converges (checked up to 2300ish)
- les_main (My copy) always converges (checked up to 1300ish)
- les_main_mpi non-convergence at time step 121 (for a 2x2 process gri…
-
I just tried this library via the 'test' binary on two 16x16 RGB123 displays chained together (thus 16x32). I found that I could set WIDTH to 16 and HEIGHT to 28 and successfully run (most of) the dis…
-
Have you ever seen unstability when flying with DCM_FLOAT? Just flying a looping kicks out an Aspirin/Umarim, horizon recovers only very slowly. Same happens if you just rotate the plane through a loo…
-
Currently you can't really use IMU_TO_BODY to set a totally different
orientation, only to correct for small errors.
e.g. for ahrs_float_dcm:
Luke Ionno wrote on the mailing list:
> I solved the pr…
flixr updated
11 years ago
-
Hey guys,
i'm using a parrot ar-drone for my project. But the bottom camera is quite bad(160x120 Pixels). This makes it quite hard to calibrate the camera and afterwards to use stereoinitialisation. …
-
Migrated from [rt.perl.org#117239](https://rt-archive.perl.org/perl5/Ticket/Display.html?id=117239) (status was 'resolved')
Searchable as RT117239$
p5pRT updated
11 years ago