-
I was having some difficulty getting my filament to feed through the opening into the hotend. I think the filament path should be widened a bit to allow for easy passage of filaments.
-
I currently have a E3v6 hotend. When I fit the printhead_rear_e3dv6.stl (standard voron 2.4 part) to the duct.stl (part of this build), the cutout for the e3v6 hotend is not correct. Looks like the…
-
Can we expose two pwm channels?
Making some mosfets optional. When they are not populated, pwm signals can be exposed.
lkong updated
4 years ago
-
some LEDs should be used to indicate power input.
lkong updated
4 years ago
-
Thanks for removing the src/Marlin.(h|cpp), but more QA was necessary: the updated, probably necessary changes to work correctly, configuration files for all the printers are only in the new Configura…
-
Hi, is it possibile to have a support for 3D passion's nova hotend?
https://3dpassion.com/nova
-
New git clones of Marlin bugfix 2.0.x and Configurations where taken about 2 hours ago.
A script of my own was run that goes through all configurations and using marlins auto_build.py
attempt to c…
-
Hi Voron Team,
i have seen, i need 6 small bearing spacer. 4 for the A/B drive unit (Page 8 in the Manual) and 2 for the front idlers (Page 20 in the Manual).
From the STL filename i need 4.
`sma…