-
It would be helpful if the build environments for the firmwares under /resources/Firmware/ and /resources/experimental/Firmware/ were published. This would help people, who want a mix of features that…
-
Hi,
Do think it is possible to use the SD card file system rather than the FFAT one.
Thanks in advance
Robert
-
### Machine Context
I have build my own laser engraver based on wemos + CNC shield. It works fine. Now I add a relay that switches on the laser and its cooling. The relay is controlled by "Laser - en…
-
I don't find any references with my question in closed issues, so what i need to use this code for my 3D printer?
So read readme i found two ways of setup.
I just to want buy this all an once and …
-
Hi, as per our discussions on the Home Assistant community forum, please see below an ESP log of the working system (i.e. using the ESP8266). Unfortunately, I will have to swop out the board when I ge…
-
Currently every user has to adjust each pin assignment by their own and for their specific hardware. If WLED is running on commercial or self designed PCB's it would be be nice to have profiles (e.g. …
-
Hi there,
I thought I'd pop you a message and let you know that I forked your code and made a minimum version of the library code for the lolin s2 mini with the lolin tft 2.4 shield.
Thanks fo…
-
### What happened?
Usermod settings do not show values for build flags HW_PIN_SCL and HW_PIN_SDA on new install. Show -1 instead:
### To Reproduce Bug
erase flash: pio run --target erase
S…
-
Hi all!
Due to updating my old project for Air Quality Sensor I'm trying to create new one with ESP32 and Color TFT 2.4 ILI9341 Wemos shield. First one was maked at mega-20220328 version - look's goo…
-
Solder jumpers for flexible confiuration; "g is Missing
at https://github.com/srg74/WLED-wemos-shield
Nice project.