-
![image](https://user-images.githubusercontent.com/48498823/223581964-3158226b-3860-47e0-9744-37b8cc9c63b1.png)
-
It needs a 12v to usbc regulator, such as: https://www.amazon.com/gp/product/B0B212GFM9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
-
### What happened?
WS2805 strips typically come as
- per 1 LED addressable at 5V
- per 3 LEDs addressable at 12V
- per 6 LEDs addressable at 24V
1, 3 or 6 LEDs are connected in series to on…
-
I found no version of the BSS84 that has a typical (not to mention a maximum) RDSon below 1Ω (at VGS=-10V, let alone at VGS=-7.5V) as required by note 5. For the BSS84 specimen mentioned in the BOM, R…
-
需要加上支持的供电标准的说明
| |=1.32|
|-----------|--------|----------|
|PD |Yes |Yes |
|DC 12V|No |Yes |
-
When the MoonratII is power by a USB cable but connected to a 12V battery with a switch, switching the battery on and OFF does NOT change the output of the TMP36 voltage as measured by an oscilloscope…
-
Hi.. just to give some report about this mod..
I followed guide from this website ( I was unable to open all files but I figured out what is needed to be soldered on motherboard)
I did modifica…
-
### Description
It would be good to have CHOPPER_09STEP_12V similar to CHOPPER_09STEP_24V.
I'm looked for some documentation on how to define properly CHOPPER_TIMINGs for 0.9 degree motors running…
-
Hi,
I am wondering is the input voltage same as v1 (5v ~ 12`v)?
thanks!!
-
I've hook up the power correctly.... But the board is not powering up. Works with USB no problem and uploaded HEX. file
I've tried it with 12v and 24v ....? not really a lot of info on this board …