-
Hi,
Since the main focus is scanning receipts, it would be better to have higher compression for the PDF's. A simple 8.5x11 paper is averaging in the 300k range. This is more data send over a mobil…
-
### Operating System
Linux
### IDE version
Arduino 1.6+
### Board
nRF52840
### BSP version
1.0.0
### SPIFlash Library version
Latest
### Sketch
[msc_external_flash.ino](https://github.com/a…
-
Hi,after that (https://github.com/mobiusml/hqq/issues/107) I want to reproduce your paper about HQQ+ but meet some problems when training:
1.Loss doesn't decrease but varies up and down…
-
1) assign read_data1 = (read_reg1==6'd0) ? {1'b0, 32'd0} : {busy[read_reg1], rf[read_reg1]}; //Is read_data1 and read_data2 32bit or 33bit wide??
2) Is busy signal a 1bit or 64 bitwide??
-
Is it possible for QOA to achieve lower bitrates for speech? like 8kbit/s or 16kbits?
-
now in the tool, dpt can be assigned to 1bit, 1byte, 2byte, etc. is there a way to assign specified sub-dpt type, such as 5.001, 5.005
-
Hello,
I have been looking for an npm package that is able to handle multi-page tiff files. Both the .pageCount() & .isMultiPage() are working great but I am getting an Unsupported bit depth / sa…
-
地點在臺灣大學(校總區)的樂學館二樓,
錄音機:Korg MR-1000 / 1bit-5.8MHz DSD portable recorder
Mai-khu: The Shure SM10A Headworn Vocal Microphones
The Shure SM10A is a low-impedance, unidirectional dynamic microph…
-
### Feedback
https://www.home-assistant.io/integrations/knx#button
description:
payload_length integer (optional, default: 0)
The length of the payload data in the telegram. Use 0 for DPT 1, 2 or …
-
Would it be possible to import 1bit images similar to how Viewer imports png for heightmaps? This would tremendously improve workflow (well.. at least mine). Obviously, any more complex solution would…