-
I attempted to run the following code on an Adafruit Feather M0 Adalogger. I installed CircuitPython 8.2.6 on the Adalogger using Thonny (also attempted this by downloading the uf2 file from [](https:…
-
The Metro M4 Lite running CircuitPython 9.0.0-beta2 does not contain the necessary socketpool library. Are the Airlift configurations going to be supported with HTTPServer?
[forum thread](https://for…
-
```c++
class DataLogger {
public:
Virtual void setup() = 0;
Virtual void loop() = 0;
Virtual void add_data(char[] key, float value()) = 0;
Virtual void write_meassage(char[] messag…
-
### Operating System
Windows 10 for host
### Board
Adafruit Feather M0 with added flash and battery including switch
### Firmware
This firmware is based on the [msc_external_flash sampl…
-
Opening this issue to document questions I come across and potential NEXT STEPS for the Open Water Level Sensor project.
- [x] PVC end caps
- [x] Parts spreadsheets
- [x] Solar system assembly
-…
-
Hello there, I know this is a few years old, but I'm excited to try it. I'm having trouble getting the SPI to initialize on the Feather M0 Express. I continue to get a:
#error No QSPI/SPI flash are…
-
Hello,
I am using the Arduino Low Power library with an MKR1000 board. I have found that when I implement the LowPower.sleep function the sleep cycle is lasting twice as long as the duration is set…
-
Recent data showed a couple reasonable distance readings but ~ 95% depth = 0.00. Unclear if issue is hardware or firmware.
-
### CircuitPython version
```python
"I am on CircuitPython 7, and tried reverting back to 6.3, same results on both."
```
### Code/REPL
```python
# If you have an AirLift Featherwing or …
-
On a `Feather M0 Bluetooth LE` running 3.1.1 and all libraries from `adafruit-circuitpython-bundle-3.x-mpy-20181208.zip`, this code works:
```
Adafruit CircuitPython 3.1.1 on 2018-11-02; Adafruit …