-
How about adding support for Message types 4 and 21? These fixed location messages may not be as interesting as mobile, but are important for shipboard navigation. Unclear to me if this app/library wa…
-
In case of multiple GPS NMEA sources Signal K should maintain
location of the antenna for each
GPS source individually and
calculate midship GPS position
taking into account antennas location o…
-
Recognize more serial port USB devices. For example dAISy AIS.
I see some configs to recognize some known GPS chipsets.
How do we recognize dAISy AIS serial ports and other NMEA ports via FTDI (thos…
-
Provide a way to for AIS-catcher to get a new __-p_ value_ from some IPC method.
Why? Since inexpensive RTL dongles (that developing nation users can better afford e.g. RTL2838) have a very wide c…
-
The current code pads vessel names that are shorter than 20 characters with 0xFF. I believe this is correct...
void SetN2kPGN129809(tN2kMsg &N2kMsg, uint8_t MessageID, tN2kAISRepeat Repeat, uint…
-
There is currently no space in the specification for a few bits of (potentially) important information which will be obtained from other vessels over AIS. Here's a list with suggested modifications to…
-
Hi Timo
As you know, I am working with you library since several years and I am very happy with it. Thanks again for your great work 😉
I have the following situation/problem. On my boat I have a…
-
Interesting node... maybe...
Any thoughts on where you may get such a feed of data from ? Is it only from certain receivers ? or online feed ? or ... some more info in the readme would be apprec…
-
I had seen cases where serial wind sensor data would stop passing via signalk.
Just restarting signalk would restore data flow.
Currently in SignalK there is no keep alive check on serial connection…
-
I saw the post you started on the liveaboard sailboat group on facebook, and figured I'd follow along with what you were doing because it might be relevant to something I had been playing with.
A few…
cnix updated
10 years ago