-
I'm trying to set this to work with my IC-7100, as it's my sole radio.
Thus far, I've found that if I change the rig value to be 370, baud to 19200, and swap /dev/ttyUSB0 for /dev/ttyACM0, I can ge…
-
I suggest to use the defaults for ./configure in the FLDIGI build. (do not supply any parameters to the ./configure call)
Defaults make for a "typical" installation of FLDIGI, and do NOT build it s…
-
I can't use pat with a Kenwood TS-480, which is a very common rig.
The problem is that the TS-480 (and presumably other rigs) has data audio in/out which is meant to be used with digital applications…
-
I have successfully built Pat for Android. It runs just fine, but we need some way of packaging it and controlling the daemon proc.
Syncthing does a great job bundling their Go appliaction and web UI…
-
As I work #79, I am taking a closer look at callsign processing within ardopcf.
The latest [TNC interface spec](https://www.winlink.org/sites/default/files/downloads/ardop_tnc_host_mode_interface_s…
-
Hi,
I just trying to install mapready on Ubuntu 18.04. I failed on building with make. Here's what I got:
In file included from /usr/include/hdf5/serial/H5public.h:145:0,
from /…
-
Hi, not sure if this is issue of the Ardop software, but it could be related to device handling and selection on Windows.
When I start ARDOPCF on windows and set all the correct devices, the transc…
-
I'm not sure if there's been an update to raspbian, but I reflashed my pi4 with the most recent version and set up 73Linux. When I attempted to enable the hotspot, it had me reboot like it was enablin…
-
Well, no kidding, of course it doesn't.
But given how well Direwolf works and how practical and well thought out the interface is, wouldn't it be nice if the community could come together and fork…
-
Everytime I'm in another country I had to change my pat config.
So an idea would be to allow setting multiple call signs or maybe even allowing to set it using the web interface.
Something like …