-
When compiling example i get this error (newest library and IDE)
C:\Program Files (x86)\Arduino\libraries\ArduCAM/ArduCAM.h:431:2: error: 'regtype' does not name a type
regtype *P_CS;
^
…
-
Look at the conversation starting at 12-05-13 for details on this feature request.
https://opendesignengine.net/boards/4/topics/387
The summary is that currently, the client decides when to set the …
-
Printing at the Arduino Zero (SAM) gives an error with:
SerialUSB.print(-2147483648);
Error message:
exit status 1
call of overloaded 'print(long long int)' is ambiguous
This goes well:
int s = -21…
-
Configuration query for Arduino Zero should return 12 rather than 10 for analog pins.
Check for a constant in pins_arduino.h that defines the analog resolution. If that doesn't exist, add it to board…
-
dear,
i would like to know what pins should i connect from the arduino board to the scooter gps board "Bird Zero" or directly to the cable!
thank you in advance
-
The conversion time for the Arduino Zero is currently around 426us, at 12-bit resolution.
This value can be calculated from the SAMD21 datasheet:
__1) ADC Sample Time Calculation__
Take the p…
ghost updated
2 years ago
-
I2C is not working using PA08 and PA09 on the ATSAMD21G18A-AU with an Arduino Zero bootloader on a custom PCB.
-Tried Modified I2C Scanner
-Normal I2C on PA22 and PA23 still work
-
I have what I think might be a common requirement: to be able to read the "absolute" angle from the encoder. This would allow my system to work after power up using an offset value that is stored pers…
-
I've tried to run compilation with your `firmware-flash.bat` script. I have no experience with arduino itself (only used it via ESPHome), how do I install missing stuff?
```
C:\Users\mieszko\GitHu…
-
I just tried to build my Arduino example project:
https://github.com/RudolphRiedel/FT800-FT813/tree/5.x/examples/EVE_Test_Arduino_PlatformIO
And it builds for everything that is configured except …