-
I have problem using i2c comunication
i am using mpu6050 i dont know why but the program is freezing and interrupts still working
-
When I specify just `"program": "ctest"` as below, the VSCode's debugger says:
```
'/Users/shinohara/.pyenv/shims/ctest' doesn't contain any 'host' platform architectures: arm64, armv7, armv7f, arm…
-
Hi,
I run the script 'nucleo_state_transfer.py' in avatar2-examples, but using a different firmware which enables a button interrupt. I want avatar2 to monitor and automatically transfer to execution…
-
Hi, thanks for helping me with my previous issue, and would like to report another one.
I am trying to generate board that uses cortex-m4 which is defined in "hw/arm/armv7m.h"
and function that shor…
-
When cctools is configured to target powerpc-apple-darwin, as assembles powerpc assembly without issue, but ld will not link it.
```
chrisnonyminus@DESKTOP-JLMSNKL:~/test/helloworld$ powerpc-apple-d…
-
I found this ADC with DMA example and did mods to get it working on current sources and running on LadyBug.
[adcdma.ino.txt](https://github.com/manitou48/STM32L4/files/837434/adcdma.ino.txt)
The o…
-
The MICROPY_PY_BTREE option is specified for ESP8266 and ESP32, but not for the Pyboard D. Is this intentional?
-
Hi,
Running the nucleo_l152re example with avatar qemu @branches dev/qemu-6.2 or dev/qemu-5.1 we face a crash issue of qemu.
It’s like the registers and ram synchronizations are ok between the boa…
-
i seem to be running into an issue using the cp command on a particular binary file. other files work fine but this one causes the board and or rshell to stop responding. a full power cycle seems to b…
-
In the v7M architecture, it is UNPREDICTABLE to have a RASR value with a non-zero SRD field for a region of less than 256 bytes (B3-697 of ARM DDI 0403E.b). It is possible to create an UNPREDICTABLE R…