-
Hi all,
Are there plans for a WifiNINA_OTA library like you have for the MKR1000 board ? Or.. is there somewhere a library that is allowing OTA programming ?
Thanks for your input
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…