-
Hey @dieselrabbit, I just installed HomeAssistant today and found your lovely ScreenLogic adapter. I'm the maintainer of https://github.com/parnic/node-screenlogic for the node.js ecosystem, and figur…
-
Just installed and it detected my equipment ok. I am able to turn the pump on and off without issue. When I press the High, med, Low speed settings Home Assistant shows the speed change but on the n…
-
### The problem
Since updating to `core-2024.1.0` my `history_stats` sensors do not seem to be updating correctly.
I have several that have worked for (literally) years. One example is a sensor th…
-
Once in a while I need to reauthenticate the integration, which causes my automation to stop. Could you make the integration as such that it tries to reauthenticate itself?
-
### The problem
Once in a while, HA crashes since I have enabled this integration.
Looking at the logs (after recovery, which is abnormally long), I can see those lines, which might be helpful to in…
-
Is it possible to capture the error states of the pump ?
Eg this morning i turned my heat pump on, and the returned state was on `pool/power` was 1, however it didnt turn on due to an E03 code, whi…
-
I was considering setting up a system to control my above ground 14k gal pool with a ControlOMatic MegaChlor-CD which is a relatively simple device you just drop in your pool (provide it with 12V set …
cb88 updated
3 months ago
-
Awesome code! It was my first time using ESP-IDF, so that was a bit of a learning curve. But once I got the code compiled, the code read all of the states and sent them to home assistant through MQTT …
-
# Log Message
```
Device matches ir_remote_sensors with quality of 9%. DPS: {"updated_at": 1719397437.7439659, "1": 0, "2": 181, "7": 98, "10": 1000, "11": 0, "101": 455, "102": -1, "103": "EUStanda…
-
### nodejs-poolController Version/commit
8.0.0 a80df29
### nodejs-poolController-dashPanel Version/commit
8.0.0 cb05840
### relayEquipmentManager Version/commit
N/A
### Node Version
v19.8.1
##…